gluBuild2DMipmaps — builds a two-dimensional mipmap
C Specification
GLint gluBuild2DMipmaps( | GLenum | target, |
| GLint | internalFormat, | |
| GLsizei | width, | |
| GLsizei | height, | |
| GLenum | format, | |
| GLenum | type, | |
| const void * | data); |
Parameters
target- Specifies the target texture. Must be
GLU_TEXTURE_2D. internalFormat- Requests the internal storage format of the texture image. The most current version of the SGI implementation of GLU does not check this value for validity before passing it on to the underlying OpenGL implementation. A value that is not accepted by the OpenGL implementation will lead to an OpenGL error. The benefit of not checking this value at the GLU level is that OpenGL extensions can add new internal texture formats without requiring a revision of the GLU implementation. Older implementations of GLU check this value and raise a GLU error if it is not 1, 2, 3, or 4 or one of the following symbolic constants:
GLU_ALPHA,GLU_ALPHA4,GLU_ALPHA8,GLU_ALPHA12,GLU_ALPHA16,GLU_LUMINANCE,GLU_LUMINANCE4,GLU_LUMINANCE8,GLU_LUMINANCE12,GLU_LUMINANCE16,GLU_LUMINANCE_ALPHA,GLU_LUMINANCE4_ALPHA4,GLU_LUMINANCE6_ALPHA2,GLU_LUMINANCE8_ALPHA8,GLU_LUMINANCE12_ALPHA4,GLU_LUMINANCE12_ALPHA12,GLU_LUMINANCE16_ALPHA16,GLU_INTENSITY,GLU_INTENSITY4,GLU_INTENSITY8,GLU_INTENSITY12,GLU_INTENSITY16,GLU_RGB,GLU_R3_G3_B2,GLU_RGB4,GLU_RGB5,GLU_RGB8,GLU_RGB10,GLU_RGB12,GLU_RGB16,GLU_RGBA,GLU_RGBA2,GLU_RGBA4,GLU_RGB5_A1,GLU_RGBA8,GLU_RGB10_A2,GLU_RGBA12, orGLU_RGBA16. width,height- Specifies in pixels the width and height, respectively, of the texture image.
format- Specifies the format of the pixel data. Must be one of
GLU_COLOR_INDEX,GLU_DEPTH_COMPONENT,GLU_RED,GLU_GREEN,GLU_BLUE,GLU_ALPHA,GLU_RGB,GLU_RGBA,GLU_BGR,GLU_BGRA,GLU_LUMINANCE, orGLU_LUMINANCE_ALPHA. type- Specifies the data type for
data. Must be one ofGLU_UNSIGNED_BYTE,GLU_BYTE,GLU_BITMAP,GLU_UNSIGNED_SHORT,GLU_SHORT,GLU_UNSIGNED_INT,GLU_INT,GLU_FLOAT,GLU_UNSIGNED_BYTE_3_3_2,GLU_UNSIGNED_BYTE_2_3_3_REV,GLU_UNSIGNED_SHORT_5_6_5,GLU_UNSIGNED_SHORT_5_6_5_REV,GLU_UNSIGNED_SHORT_4_4_4_4,GLU_UNSIGNED_SHORT_4_4_4_4_REV,GLU_UNSIGNED_SHORT_5_5_5_1,GLU_UNSIGNED_SHORT_1_5_5_5_REV,GLU_UNSIGNED_INT_8_8_8_8,GLU_UNSIGNED_INT_8_8_8_8_REV,GLU_UNSIGNED_INT_10_10_10_2, orGLU_UNSIGNED_INT_2_10_10_10_REV. data- Specifies a pointer to the image data in memory.
Description
gluBuild2DMipmaps builds a series of prefiltered two-dimensional texture maps of decreasing resolutions called a mipmap. This is used for the antialiasing of texture-mapped primitives.A return value of zero indicates success, otherwise a GLU error code is returned (see gluErrorString).
Initially, the
width and height of data are checked to see if they are a power of 2. If not, a copy of data (not data), is scaled up or down to the nearest power of 2. This copy will be used for subsequent mipmapping operations described below. (If width or height is exactly between powers of 2, then the copy of data will scale upwards.) For example, if width is 57 and height is 23, then a copy of data will scale up to 64 in width and down to 16 in depth, before mipmapping takes place.Then, proxy textures (see glTexImage2D) are used to determine if the implementation can fit the requested texture. If not, both dimensions are continually halved until it fits. (If the OpenGL version is \(<= 1.0, both maximum texture dimensions are clamped to the value returned by glGetIntegerv with the argument
GLU_MAX_TEXTURE_SIZE.)Next, a series of mipmap levels is built by decimating a copy of
data in half along both dimensions until size 1 × 1 is reached. At each level, each texel in the halved mipmap level is an average of the corresponding four texels in the larger mipmap level. (In the case of rectangular images, the decimation will ultimately reach an N × 1 or 1 × N configuration. Here, two texels are averaged instead.)glTexImage2D is called to load each of these mipmap levels. Level 0 is a copy of
data. The highest level is log 2 max width height . For example, if width is 64 and height is 16 and the implementation can store a texture of this size, the following mipmap levels are built: 64 × 16 , 32 × 8 , 16 × 4 , 8 × 2 , 4 × 1 , 2 × 1 , and 1 × 1 These correspond to levels 0 through 6, respectively.See the glTexImage1D reference page for a description of the acceptable values for
format parameter. See the glDrawPixels reference page for a description of the acceptable values for type parameter.Notes
Note that there is no direct way of querying the maximum level. This can be derived indirectly via glGetTexLevelParameter. First, query for the width and height actually used at level 0. (The width and height may not be equal towidth and height respectively since proxy textures might have scaled them to fit the implementation.) Then the maximum level can be derived from the formula log 2 max width height .Formats
GLU_BGR, and GLU_BGRA, and types GLU_UNSIGNED_BYTE_3_3_2, GLU_UNSIGNED_BYTE_2_3_3_REV, GLU_UNSIGNED_SHORT_5_6_5, GLU_UNSIGNED_SHORT_5_6_5_REV, GLU_UNSIGNED_SHORT_4_4_4_4, GLU_UNSIGNED_SHORT_4_4_4_4_REV, GLU_UNSIGNED_SHORT_5_5_5_1, GLU_UNSIGNED_SHORT_1_5_5_5_REV,GLU_UNSIGNED_INT_8_8_8_8, GLU_UNSIGNED_INT_8_8_8_8_REV, GLU_UNSIGNED_INT_10_10_10_2, and GLU_UNSIGNED_INT_2_10_10_10_REV are only available if the GL version is 1.2 or greater and if the GLU version is 1.3 or greater.Errors
GLU_INVALID_VALUE is returned if width or height is < 1.GLU_INVALID_ENUM is returned if internalFormat, format, or type is not legal.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_BYTE_3_3_2 or GLU_UNSIGNED_BYTE_2_3_3_REV and format is not GLU_RGB.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_SHORT_5_6_5 or GLU_UNSIGNED_SHORT_5_6_5_REV and format is not GLU_RGB.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_SHORT_4_4_4_4 or GLU_UNSIGNED_SHORT_4_4_4_4_REV and format is neither GLU_RGBA nor GLU_BGRA.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_SHORT_5_5_5_1 or GLU_UNSIGNED_SHORT_1_5_5_5_REV and format is neither GLU_RGBA nor GLU_BGRA.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_INT_8_8_8_8 or GLU_UNSIGNED_INT_8_8_8_8_REV and format is neither GLU_RGBA nor GLU_BGRA.GLU_INVALID_OPERATION is returned if type is GLU_UNSIGNED_INT_10_10_10_2 or GLU_UNSIGNED_INT_2_10_10_10_REV and format is neither GLU_RGBA nor GLU_BGRA.See Also
gluBuild1DMipmapLevels, gluBuild1DMipmaps, gluBuild2DMipmapLevels, gluBuild3DMipmapLevels, gluBuild3DMipmaps, gluErrorString, glDrawPixels, glGetTexImage, glGetTexLevelParameter, glTexImage1D, glTexImage2D, glTexImage3DCopyright
Copyright © 1991-2006 Silicon Graphics, Inc. This document is licensed under the SGI Free Software B License. For details, see http://oss.sgi.com/projects/FreeB/.Example 1.
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_LOD, 0 );
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAX_LOD, 0 );
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_BASE_LEVEL, 0 );
GLint ret = gluBuild2DMipmaps(GL_TEXTURE_2D, gl_InternalFormat(),
m_iWidth, m_iHeight, gl_RasterFormat(), gl_RasterType(),
&m_pSrcBitmap[0]);
------------------------------------------------------------------------------------------
Example 2
GLint ret = gluBuild2DMipmapLevels(GL_TEXTURE_2D,
gl_InternalFormat(),
m_iWidth, m_iHeight, gl_RasterFormat(), gl_RasterType(),
0, 0, 0,
&m_pSrcBitmap[0]);
